Author |
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|
Bosbad
Netherlands
55 Posts |
Posted - 03/01/2016 : 15:31:46
|
can anyone help me to get an 3" ring to install a rev. counter on a Lemans M type dashboard. a ring for 3" speedometer will perfectly do the job.
![](http://www.triple-mregister.org/forums/uploads/Bosbad/20161315_image.jpeg) |
|
LewPalmer
USA
3246 Posts |
Posted - 03/01/2016 : 21:42:09
|
Try classicbezels.com Not much of a web site, but I have referred a number of people there and all have been pleased.
Lew Palmer PA1169, PB0560 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Bosbad
Netherlands
55 Posts |
Posted - 04/01/2016 : 21:54:03
|
where I just checked the bezzel needs to be 80 mm istead of 3"; the one of my speedo fits also on the rev meter, which bezel I'm looking for
![](http://www.triple-mregister.org/forums/uploads/Bosbad/20161421_image.jpeg) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
JohnE
United Kingdom
376 Posts |
Posted - 04/01/2016 : 22:37:22
|
This is the unlit rim from a '29 M type speedo, the ring is 85.5mm OD, 73mm ID, (ignore the steel outer ring which covers up the dash panel and ignition light fit). I think the brass V ring was silver soldered on to the 81mm OD tube, then nickel or later chrome plated. There is a rubber ring tucked up inside for the glass to press against. The tube often splits because of the expansion of the zinc based speedo chassis.
It is hard to see how an 80mm rev counter, maybe an 80mm clock, temp gauges and fuel tank pressure gauge all could fit on an M dash, does anyone have a photo or drawing of either of the LeMans cars to see what was there?
![](http://www.triple-mregister.org/forums/uploads/JohnE/20161422_DSCF4850.jpg)
![](http://www.triple-mregister.org/forums/uploads/JohnE/20161422_DSCF4849.jpg)
JohnE |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
poulsendk
Denmark
270 Posts |
|
JohnE
United Kingdom
376 Posts |
|
patrick henry
United Kingdom
116 Posts |
Posted - 09/01/2016 : 08:53:21
|
If you are still looking for a bezel please email me and I will send you one, Regards Patrick
vintageinstruments@hotmail.co.uk
pchenry |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Bosbad
Netherlands
55 Posts |
Posted - 18/01/2016 : 21:13:21
|
hi guys,
thank you all for responding; I found an original one which is best for me.
![](http://www.triple-mregister.org/forums/uploads/Bosbad/201611821_image.jpeg) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
|
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|