Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 M Type Rear Wing Stay		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

geoffw

Australia
106 Posts
Posted - 12/07/2017 :  08:39:04  Show Profile
I need a pair or a link to where I might try.

Geoff W.

ja.mcnab

United Kingdom
204 Posts
Posted - 12/07/2017 :  09:15:48  Show Profile
S&V supply them - part no. 1984
Go to Top of Page

geoffw

Australia
106 Posts
Posted - 13/07/2017 :  23:07:56  Show Profile
The S&V part 1984 shown in their catalogue is listed for J's & later cars. It is different to the M stay (see photos in the Technical thread} I have sent S&V an enquiry & am awaiting their reply

Geoff W
Go to Top of Page

Scrumps

United Kingdom
4 Posts
Posted - 14/07/2017 :  12:26:06  Show Profile
Try these- they are like the one's on my '32 car

http://prewarmgparts.co.uk/k-and-q-type-wing-clamps/p495371.html
Go to Top of Page

Keith Durston

United Kingdom
713 Posts
Posted - 14/07/2017 :  14:28:37  Show Profile
Well done Mark. I knew there would be someone out there who had the right car/wing to share information from. I think Geoff will be sorted now.
Keith
Go to Top of Page

geoffw

Australia
106 Posts
Posted - 14/07/2017 :  23:11:09  Show Profile
Thankyou Mark, I'll contact Andy King & order a pair.
By coincidence a local M owner emailed me yesterday & suggested I try Andy as well.
Another small step toward making my car more original!

Geoff W.
Go to Top of Page

geoffw

Australia
106 Posts
Posted - 15/07/2017 :  00:53:28  Show Profile
I've been on Andy King's web site & notice he also has M type wing clamps similar to the ones posted on my thread in the Technical section (the 2 bolt type).
Which is correct for my late (December) '31 metal bodied M?

Geoff W
Go to Top of Page

Keith Durston

United Kingdom
713 Posts
Posted - 15/07/2017 :  09:24:24  Show Profile
Geoff,
Mark should be able to confirm but I think that the wing clamps are relative to the wing shape and not fabric or metal body type. I think your car, being metal bodied has the square "helmet" rather than the round section beaded type wing and that the oval 2 holed fixing plate would be at the wrong angle to fit your wing.
Andy King may be able to help to confirm this info as well.
Keith
Go to Top of Page

Scrumps

United Kingdom
4 Posts
Posted - 15/07/2017 :  14:24:51  Show Profile
Hi,

I believe the stay change from "diamond" 2-bolt to "round" bolt-through when the round wings changed to V-shaped.

The parts. List here:-
http://www.triple-mregister.org/uploads/retro/M%20Type%20Parts%20List.pdf

Shows (on page 22) that the changeover is @ 2M2703/4.

If you look, the rearwing "stay" is. Part no. 227 throughout however, up to 2M2703 the wing bracket (front) is. Part no. 226 with qty 6 and a note saying "2 for rear" after 2M2704 the rear bracket is listed separately as part no. 587.

Mark
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000