Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 M exhaust manyfold		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

DADA

Luxembourg
127 Posts
Posted - 20/10/2017 :  07:29:38  Show Profile
Dear members, does anybody know where I can get one of those exhaust manifolds fabricated? According to Barry Foster Dave Tyler could do it, but I got no contact data, phone or email address.
Is there another company which could do it?
Thank you for your help.
DADA

O.Thomas

United Kingdom
755 Posts
Posted - 20/10/2017 :  07:50:32  Show Profile
Sent you an e mail via the web,oliver
Go to Top of Page

SV4670

United Kingdom
304 Posts
Posted - 20/10/2017 :  09:31:36  Show Profile
I want one of those as well! Andy King shows them on his website but not interested in selling them. I also want a downdraught inlet manifold
Go to Top of Page

TomDrewett

United Kingdom
277 Posts
Posted - 20/10/2017 :  11:24:46  Show Profile
Me too! I would also like one for my M

MG M Type
Go to Top of Page

JCB

United Kingdom
384 Posts
Posted - 20/10/2017 :  11:30:47  Show Profile
Dear Dada and Forum:

Follow link below, web site phone number.
A Google search brings up lots of information.
Just love that internet.

John Bakewell

http://www.swindonpages.co.uk/company/875690096250881
Go to Top of Page

Malcolm Eades

United Kingdom
379 Posts
Posted - 20/10/2017 :  11:43:09  Show Profile
It's also worth trying Maniflow in Salisbury. They made up a s/s twin box system for my Z Magnette while I waited, but they do LCB manifolds too. www.maniflow.co.uk

Malcolm
M Type

Go to Top of Page

George Eagle

United Kingdom
3243 Posts
Posted - 20/10/2017 :  16:21:31  Show Profile
I have used Exhausts by Design, Tingewick, for the exhaust on both my L2 and MGB GT V8 - the standard is excellent.

The details should be in the suppliers section of this web site.

No connection, just a satisfied customer.

George
L2023
Go to Top of Page

Blue M

United Kingdom
1474 Posts
Posted - 21/10/2017 :  19:32:44  Show Profile
I found an exhaust specialist who could make one of these but " to be honest you probably won't notice much difference". I showed him photos of several designs and the only one he approved of was the full-flow one as used by Frank Ashley.
I'm told the inlet manifold can be a modified A7 one. From what I've read it would seem there is no performance benefit in a vertical carb - it's a matter of practicality; with an 'exit through the bonnet side exhaust' there is no option. But they look impressive!
Go to Top of Page

davies

United Kingdom
699 Posts
Posted - 23/10/2017 :  11:22:53  Show Profile
I have an original Derrington Manifold in scrap condition that could be useful as a pattern if anyone is interested -Rich
Go to Top of Page

John Haine

United Kingdom
208 Posts
Posted - 23/10/2017 :  11:34:22  Show Profile
I also need a Derrington exhaust manifold. I used to have one, together with semi-downdraught twin SU's to fit an M-Type but the exhaust disappeared during a flat move in 1965. I still have the SU's and the inlet manifold. John
Go to Top of Page

davies

United Kingdom
699 Posts
Posted - 23/10/2017 :  14:11:14  Show Profile
the Derrington is combined inlet/exhaust -Rich
Go to Top of Page

FrankAshleymgm

United Kingdom
115 Posts
Posted - 26/10/2017 :  18:54:42  Show Profile
My exhaust manifold was made by Gran Fabrications and is still in excellent order after 18 years of service.
The contact details are:-
Gran Fabrications: Address: 6-8 Leen Valley House Bulwell Nottingham Nottinghamshire NG6 8SB: Contact: Andy Newton: Telephone: 0115 9761 864: Email: andrew_newton hotmail.co.uk:

Frank

Frank Ashley
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000