Triple-M Register - Altette Horn on PB

Triple-M Register

Username:	Password:
Save Password
Forgot your Password?

All Forums

Triple-M Register Forums

General Information

Altette Horn on PB

Forum Locked

Topic Locked

Printer Friendly

Author

Topic

dade

United Kingdom
513 Posts

Posted - 11/06/2019 : 12:57:18

I am at the moment refitting the Horn to my car and suspect that the fixing bracket that I have may be incorrect.

I would appreciate it if someone could post a photo of the bracket and also showing its fixing to the headlamp bracket.

I am assuming that the correct bracket has a slight angle on it to "centre" the Horn between the Wing and the Rad.

I have visited Taff the Horns web site and although it is full of information I found it slightly confusing!

Russ
PB0333

Bruce Sutherland

United Kingdom
1565 Posts

Posted - 11/06/2019 : 16:11:58

Russ,
Will these help? - Should be under "Technical".

Bruce. (PB0564)

Edited by - Bruce Sutherland on 11/06/2019 16:21:33

Bruce Sutherland

United Kingdom
1565 Posts

Posted - 11/06/2019 : 16:52:37

Bruce. (PB0564)

PreWarMG

Australia
428 Posts

Posted - 12/06/2019 : 10:37:13

You will find the same mounting bracket on an MG Y-Type - affixed to the front of the cross member.

We are here for a good time, not a long time !.

dade

United Kingdom
513 Posts

Posted - 12/06/2019 : 12:12:19

Hi Tony and Bruce

Thanks for your prompt reply.

My bracket is indeed the wrong type when comparing with your information

I remember altering the angle of the "ear" in order to Centre the horn between the Rad and the wing, I notice that their is no angle on the fold for the ear in your info.

Also I have no Birds Beaks in my bracket so thanks to you guys I am looking for a Horn Bracket or now that I have Bruce's excellent drawing I may set to and make one.

Thanks again for your help.

Regards

Russ

Topic

Forum Locked

Topic Locked

Printer Friendly

Jump To:

Triple-M Register

Snitz Forums 2000