Author |
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|
Scartie
Belgium
11 Posts |
Posted - 12/08/2019 : 12:40:04
|
Hello, I broke this weekend 1 clutch operating finger on my PB 565
I would need urgentely following spare parts because I do a rally in 12 days ! 4 x Clutch operating finger & pin 4 x clutch finger adjusting screw & pin 4 x clutch operating finger mounting bolt assy
I phoned MG-parts-spares.co.uk but they're closed till next week and they would not have those parts according to the workshop. Is there another solution to repair or replace quickly those parts ? THX
![](http://www.triple-mregister.org/forums/uploads/Scartie/2019812123942_MGX20WorkshopX20058.jpg)
Scartie PB 565 PB 681 |
|
DickMorbey
United Kingdom
3678 Posts |
Posted - 12/08/2019 : 13:02:32
|
Dear Scartie
Good luck in your quest for spares. Sports & Vintage (Mike Dowley - see http://www.sportsandvintage.co.uk/ ) have returned from holiday today.
I see that you have PB0681 as well as PB0565. Could you please contact our PB registrar, Graham Arrondelle to update us because 0681 is still recorded as owned by Peter van de Gevil. Graham can be contacted at grahamarrondelle[at]yahoo[dot]com
Thanks!
Dick Morbey PA-PB 0743 Frieth, Oxon, UK |
Edited by - DickMorbey on 12/08/2019 13:04:09 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
lordrob
Belgium
226 Posts |
Posted - 12/08/2019 : 15:53:53
|
Hallo, ik kan misschien helpen. Mijn email is in mijn " profile"
lordrob |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Scartie
Belgium
11 Posts |
Posted - 14/08/2019 : 15:01:58
|
Hi All,
I've been helped by fellow Belgian P owner lordrob who sold me used but complete P-series clutch cover plate. But it seems to be very hard to find those parts, be it seperately or as a complete set : does anyone know where to find those ?
Sport & Vintage didn't know either…
THX !
Scartie PB0565 PB0681 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
MaGic_GV
United Kingdom
868 Posts |
Posted - 14/08/2019 : 17:15:40
|
These parts do not seem to be generally available. I have suffered from a broken clutch finger, which I replaced with one that was bent (straightened in a vice, thanks Foz) and it has been ok since. I have an old clutch plate with fingers rescued from a fire but I am not sure what use the fingers are after this 'heat treatment', so I haven't tried to use them...
Regards, Graham
|
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
LewPalmer
USA
3244 Posts |
Posted - 14/08/2019 : 17:23:39
|
For quite a while, I had been looking for the bolts that go through the flywheel and hold the base of the clutch fingers in place. No one seems to be making them, so I cobbled together some grade 8 bolts to make do. I'm still looking for proper replacements. So if any of our vendoes are listening, there is yet another PA/PB clutch part opportunity.
Lew Palmer PA1169, PB0560 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
|
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|