Author |
Topic |
Tony Dolton
United Kingdom
372 Posts |
Posted - 20/03/2020 : 18:38:04
|
An interesting problem for those of us who are old enough to be facing home isolation.what do we do do to avoid serious boredom. I’ve set myself a project. Over the last 50 yrs , I have rebuilt,restored, constructed 14 MMM MG’s, so I’m going to write a manual based on my experiences,difficulties,successes, etc, my version of a MMM workshop manual, just for my own enjoyment. I will pass the hand written info to my son,Mark ,. He can decide what to do with it. Anyone else got some interesting ideas for the next twelve weeks? Keep well everyone.Tony |
|
colintf
United Kingdom
1501 Posts |
Posted - 20/03/2020 : 20:28:40
|
That's a fantastic idea Tony. No doubt a lot of us could learn from that :)
Colin Murrell D0285 Photographer for MGCC (LeMans Classic, Oldtimer Grand Prix etc) & MG Motor (BTCC 2012-5) http://www.triple-mracing.com/ |
|
|
guitarrero
United Kingdom
148 Posts |
Posted - 20/03/2020 : 21:08:27
|
Put me down for a copy please Tony .... the way things are going, it looks like you'll have plenty of time to write it !!!
I shall be in my workshop, busy making classical guitars ...
All the best!
Steve Rees North Cotswolds, UK
|
|
|
Cooperman
United Kingdom
760 Posts |
Posted - 20/03/2020 : 22:31:14
|
I've set myself to clear out and tidy both my office and the motorshed. And of course get my M type on the road.
John Cooper M 628 |
|
|
Ian Bowers
United Kingdom
941 Posts |
Posted - 21/03/2020 : 07:44:25
|
Can I please join the list of tho9se waiting for the Dolton Manual.
For me, work in a secluded office, keeping the business above water.
Ian Bowers OD 6791 J3 3772 |
|
|
colintf
United Kingdom
1501 Posts |
Posted - 21/03/2020 : 08:33:37
|
Tony, you could well have a best seller on your hands :) :) :)
Colin Murrell D0285 Photographer for MGCC (LeMans Classic, Oldtimer Grand Prix etc) & MG Motor (BTCC 2012-5) http://www.triple-mracing.com/ |
|
|
DickMorbey
United Kingdom
3677 Posts |
Posted - 21/03/2020 : 08:42:49
|
Hello folks,
A while ago the Register was asked whether we might follow the example of the Lagonda fraternity. They have published what amounts to a Haynes Manual for their various models.
Triple-M cars are by their nature more varied than, say, Lagondas, but nevertheless the idea has great merit. The committee has successively picked up - and 'parked' the suggestion for various reasons: Complexity; the need for reliable and dependable information; the fact that much worthwhile info has already been published in Register publications, on this forum, on the mmm.com Dutch website, in the Barry Walker detailed catalogue (now available through the MG Automobile Company's website) and suchlike.
Tony's initiative is nevertheless most welcome and it revives the thought that we should be trying to find some way of drawing all this info together for the general benefit of Members. Suggestions about a) whether and if so b) how to approach this opportunity would be welcomed!
Dick Morbey PA-PB 0743 Frieth, Oxon, UK |
|
|
Westbury
United Kingdom
2010 Posts |
Posted - 21/03/2020 : 09:07:10
|
Tentatively !
What would be interesting would be member’s own experiences of building or restoring our cars and not necessarily based on ‘ reliable or dependable ‘ information. As Dick points out, a large amount of scholarly technical articles and books have already been published on the subject.
These experiences do not have to be extensive to be of interest although welcome. Mere snippets, I’m sure, could be entertaining !
I was thinking this Forum could be the place to record some of these experiences which taken as a whole must be pretty enormous.
What do others think ?
Chris
|
|
|
JDoe
United Kingdom
85 Posts |
Posted - 21/03/2020 : 09:58:16
|
I'm trying to teach myself how to use a lathe... So far I'm just becoming proficient at snapping parting off tools (or should that be parting snapping off tools?)
|
|
|
George Eagle
United Kingdom
3238 Posts |
Posted - 21/03/2020 : 10:07:07
|
Great idea Tony, as Dick has mentioned the subject of drawing up a manual which would incorporate a lot of the superb material members have submitted over the years would be a very useful source of information/reference. I recall the Lagonda version was brought to the attention of the Committee a while age.
I would certainly put my name down for a copy and might be willing to assist in some way in producing the manual?
At my age, and after 6 rebuilds, I decided to tackle a 1/3rd scale traction engine! Being an amateur machinist I have found it to be quite a challenge. I have learnt it is better to measure 5 times before cutting/parting off!
George L2023
|
Edited by - George Eagle on 21/03/2020 10:13:32 |
|
|
JCB
United Kingdom
384 Posts |
Posted - 21/03/2020 : 10:10:49
|
Tony and Forum:
I too would like a copy of this workshop manual/ website . Haynes/Blower look alike.?
Would a coalition of the willing combined with crowd funding and a gentle hands on approach be a working talking point? All the best.
John Bakewell |
|
|
Westbury
United Kingdom
2010 Posts |
Posted - 21/03/2020 : 11:49:19
|
Hello, Andrew.
Parting off on the lathe can be tricky even for professionals so don’t despair ! It is particularly important to grind the cutting tool with adequate side and top clearance ( angles ) also put an angle on the front of the tool. Set the tool accurately for centre height and reduce the overhang of the tool to a minimum. Also, try to set the workpiece as close to the Chuck as possible, and select the ideal speed for the job in hand. ( You probably know all this anyway !) When turning, wind the tool in gradually and if any difficulty is experienced be ready to back off and apply gradually again. Patience is the watchword. You can also move the tool slightly sideways to help with side clearance as the machine is turning. Trial and error helps. Best of luck.
Chris |
|
|
Tony Dolton
United Kingdom
372 Posts |
Posted - 21/03/2020 : 17:18:13
|
I do have a tatty old Myford 7 lathe, but I’m self taught, common sense and trial and error. I only do the simple jobs, a very useful tool. My principle objective is to provide Mark with as much useful info as pos. I learnt from my mistakes and if I can help anyone avoid those it will be worthwhile. Although not a trained engineer (I’m an Industrial Chemist) I always worked in an engineering environment.,technical sales. It helped enormously to get help when needed from ex Vanwall engineers and one of the best tool rooms in the country. Even so I’m very much an amateur, viewing our cars as grown up Meccano sets. It’s important to know when to stop and seek help from the professionals. |
|
|
Simon Johnston
United Kingdom
6121 Posts |
Posted - 21/03/2020 : 18:03:07
|
By way of a taster of what we might hope for from Tony's planned opus, readers might be interested in a previous article of his in the 1985 Yearbook, Converting P and N Type Engines to Thin Wall Shell Bearings available here - https://www.triple-mregister.org/uploads/retro/MMMyb1985.pdf
Like everyone else, I’m looking forward to it.
In the meantime I have the 2019 Yearbook to get to the printers in ten days' time, and then the J2 rear axle to reassemble. So enough to keep me going for a while at the rate I do things these days in the garage.
Simon J J3437 |
|
|
Tony Dolton
United Kingdom
372 Posts |
Posted - 21/03/2020 : 21:39:02
|
Good heavens Simon, I’d forgotten all about that, seemed a good idea at the time. The only person I know who followed me was John Adams with his Centric blown P type. It soon became apparent that the presized camshaft bushes would become obsolete, so with Andrew Kirby’s help we came up with a design for new cranks that utilised shell bearings for all mains .This required assembly jigs for inserting twin shells into the front and main bearing housings. Both our P types have such an assembly. However following discussions with Bob Jones we agreed the procedure was unnecessary for P and N engines due to the large main bearing area . Even with high boosts it’s difficult to see how the fatigue strength of cast white metal would be exceeded so long as bearing wall thickness remained modest. Given most engine builders were using Phoenix cranks by then with good filtration systems dirt should not be a problem. Cast white metal has real advantages, very good embeddability, and good conformability. But the real benefit is that the final operation is line boring which removes any potential alignment problems. So my advice now is find a good whitemetal caster, keep it original and just use shells for the rod bearings. Tony |
|
|
Simon Johnston
United Kingdom
6121 Posts |
Posted - 21/03/2020 : 21:43:20
|
Tony, I remember being fascinated by your article at the time although it had no applicability to my J2 engine which was still a pile of bits at that time (and for another 25 years!). So looking forward to the next episode!
Simon J J3437 |
|
|
Topic |
|