Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 General Information
 M Type Bronze Carburettor		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

talbot

United Kingdom
718 Posts
Posted - 30/03/2008 :  19:30:57  Show Profile
I've just rebushed my carb throttle spindle holes and note the disc can go back in one of two ways. Can someone please let me know if, looking at the spindle from the side where the leaver is attached, the throttle opens in a clock or anti clock direction.It's the leaver that is confusing - there are two stop screws and I don't know which sets the tick over and which the max opening.

Thanks in anticipation


Jan T

Bruce Sutherland

United Kingdom
1569 Posts
Posted - 30/03/2008 :  20:05:10  Show Profile
"............ looking at the spindle from the side where the leaver is attached, the throttle opens .........." anticlockwise.
"...... the leaver has two stop screws......." the upper leg of the lever sets the tick over and the lower leg may have a screw to set 'wide open throttle' (WOT)!
You can see this in the diagram for the OM carburretor on the Burlen website http://www.burlen.co.uk/partList.aspx?carID=10700.
Hope this helps.


Bruce.
Go to Top of Page

talbot

United Kingdom
718 Posts
Posted - 31/03/2008 :  17:06:37  Show Profile
Thank you Bruce - prompt replies and simple advice keeps this forum alive

Jan T
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000