| Author |
 Topic  |
|
|
YVES CREYX
France
63 Posts |
 Posted - 30/01/2021 : 17:38:21
|
I am looking for informations about rear backseat attachment and adjustment parts for a PA 2 seater.
And If you have this parts available, great interest for me, of course ! New or second hand, no problem.
PA 01013.
YVES CREYX |
|
|
Horst Wendling
Germany
465 Posts |
Posted - 31/01/2021 : 18:43:13
|
Yves,
i made my itself, look here...
Do you have time, i can make a pair for you in the same form, but with different round screws in Aluminium.
Send me a email do you have an questions.
Horst
PA492 |
 |
|
|
LewPalmer
USA
3248 Posts |
Posted - 31/01/2021 : 18:52:45
|
Likewise. Fiddly, but not difficult with some 3mm brass stock.
Lew Palmer
PA1169, 2M1281, NA0651 |
|
|
|
Oz34
United Kingdom
2564 Posts |
Posted - 31/01/2021 : 19:15:54
|
Yves, looking at the two, Lew's version is like my original ones on a PA while Horst's I think are T Type ones.
Dave |
|
|
|
YVES CREYX
France
63 Posts |
Posted - 01/02/2021 : 19:43:59
|
Many thanks dear members for all this précisions. These parts are very simple and it’s not a problem for me to make them. Dave, I’ll do the Lew’s version.
YVES CREYX |
|
|
|
LewPalmer
USA
3248 Posts |
Posted - 05/02/2021 : 02:46:14
|
If it's any use, I found the same photo I posted above, only with some dimensions.
Lew Palmer
PA1169, 2M1281, NA0651 |
|
|
|
YVES CREYX
France
63 Posts |
Posted - 06/02/2021 : 18:10:45
|
Great Lew for this cotations. Tomorrow I attack the reproduction.
Thank a lot.
Yves PA 1013
YVES CREYX |
|
|
|
LewPalmer
USA
3248 Posts |
Posted - 06/02/2021 : 22:18:08
|
Yves, By the way, the screws used as a pivot point were only temporary. They were later replaces with rivets.
Lew Palmer
PA1169, 2M1281, NA0651 |
|
|
|
YVES CREYX
France
63 Posts |
Posted - 07/02/2021 : 08:28:12
|
Thank you Lew, it was clear for me, the pivot needs a rivet.
YVES CREYX |
|
|
| |
Topic |
|
Forum Locked
Topic Locked
