Author |
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|
TCTom
USA
281 Posts |
Posted - 14/05/2021 : 19:13:23
|
Who is currently carrying the fittings for the chassis lube system? I need lots of pieces for my MMMs!
Tom Wilson Zionsville, IN USA |
|
Oz34
United Kingdom
2567 Posts |
Posted - 14/05/2021 : 20:45:50
|
Well I have a couple of the one way adjustable fittings on the way from S&V at the moment. I bought one of the 3 way ones for the brake X-shaft from them about a year ago Why not try Jamie?
Dave |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
TCTom
USA
281 Posts |
Posted - 15/05/2021 : 00:28:19
|
Will do. Thanks, Dave.
Tom Wilson Zionsville, IN USA |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
DickMorbey
United Kingdom
3682 Posts |
Posted - 15/05/2021 : 09:31:27
|
While on the subject, Barry Walker produced an excellent guide many decades ago about the way in which the internal needle valves of these connecting unions should be adjusted to give the appropriate oil flow
Dick Morbey, Register Secretary PA-PB 0743 Frieth, Oxon, UK secretary@triple-mregister.org |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
i.thomson
United Kingdom
408 Posts |
Posted - 15/05/2021 : 09:52:11
|
I believe the people at Bicester airfield who bought out BWs business recently carry them.
Ian |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
LewPalmer
USA
3248 Posts |
Posted - 15/05/2021 : 15:01:47
|
And you can get the 5/32" brass tubing from Alaskan Copper & Brass 48 feet will be about $150.
Lew Palmer PA1169, 2M1281, NA0651 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Simon Johnston
United Kingdom
6168 Posts |
|
DickMorbey
United Kingdom
3682 Posts |
Posted - 15/05/2021 : 18:42:32
|
Thanks Simon
It's an evolution of an earlier BW drawing which contaoined rather more info. I will look to see whether I still have it...
Dick Morbey, Register Secretary PA-PB 0743 Frieth, Oxon, UK secretary@triple-mregister.org |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
DickMorbey
United Kingdom
3682 Posts |
Posted - 15/05/2021 : 20:36:52
|
I dug deep and found this chart from BW from around 1975. Somewhere or other (perhaps on an old Infoletter?) I recall seeing needle valve settings for the various unions to ensure the right oil flow for the particular area of the chassis. Anyone recall that?
![](https://www.triple-mregister.org/forums//uploads/DickMorbey/2021515203630_Barry Walker chassis oiling chart c 1975 reduced.jpg)
Dick Morbey, Register Secretary PA-PB 0743 Frieth, Oxon, UK secretary@triple-mregister.org |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Simon Johnston
United Kingdom
6168 Posts |
|
TCTom
USA
281 Posts |
Posted - 16/05/2021 : 03:10:30
|
Thanks everyone, that helps a lot. You are even answering my questions before I ask them!
Tom Wilson Zionsville, IN USA |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
LewPalmer
USA
3248 Posts |
|
i.thomson
United Kingdom
408 Posts |
Posted - 16/05/2021 : 10:13:05
|
It has been brought to my attention that Barry Walker has got his parts business back-up and running again for almost 2 years now as Blue Diamond at Bicester have dropped supply of MG parts. Sorry for the confusion in my earlier post. Ian |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Simon Johnston
United Kingdom
6168 Posts |
Posted - 16/05/2021 : 13:11:06
|
Oddly enough, their website is still up - hence my link above
Simon J J3437 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
|
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|