Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 Andre Hartford 306/506 Centre Arm		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Ian Prior

Australia
14 Posts
Posted - 07/08/2022 :  11:41:25  Show Profile
Looking for a centre arm ( single blade ), off a 306/506, the early riveted type arm
6 inch length for PA
Ian

Ian Prior

Australia
14 Posts
Posted - 10/08/2022 :  08:00:04  Show Profile
As no arms appear to be available as an alternative a complete early style ( ie with the riveted ends ) that I can refurbish would be great

cheers
Ian
Go to Top of Page

Simon Johnston

United Kingdom
6155 Posts
Posted - 10/08/2022 :  11:08:20  Show Profile
These folks might be able to help - https://www.vintageandclassicshockabsorbers.co.uk/

Simon J
J3437
Go to Top of Page

coracle

United Kingdom
1967 Posts
Posted - 10/08/2022 :  11:14:12  Show Profile
I have an ancient and tatty pair somewhere; I am not sure if they are riveted. Once I have found them I will update.
Go to Top of Page

coracle

United Kingdom
1967 Posts
Posted - 10/08/2022 :  15:32:12  Show Profile
Correction: I should have said I had two, but they are not a pair. One is riveted and one is not.

Unfortunately, the centre arm of the riveted one has at some time been broken and welded back together again; see photo.


If all else fails, the repaired arm could be tidied up. Is it of any interest?
.
Go to Top of Page

Adrian Moore

United Kingdom
92 Posts
Posted - 10/08/2022 :  21:02:13  Show Profile
Hi Ian
Dad said he’s got some of your still looking
Regards Adrian

Adrian Moore
Go to Top of Page

Ian Prior

Australia
14 Posts
Posted - 11/08/2022 :  07:39:02  Show Profile
Thank You Gentlemen

Simon - yes I had contacted VCSA and am still awaiting a response

Coracle - could be a good solution with a bit of fettling, I'll just check if Adrian's Father has one first

Adrian - yes I would appreciate it if your father could check his spares.

The shocker is for PA 1677 the Don Moore car restored to standard 2 seater configuration in the 1960s but now needing much TLC

regards
Ian
Go to Top of Page

coracle

United Kingdom
1967 Posts
Posted - 11/08/2022 :  09:24:07  Show Profile
Ian,

Happy to be a last resort; I'll pop them back on the shelf (in the heap) for now.
Go to Top of Page

Simon Johnston

United Kingdom
6155 Posts
Posted - 11/08/2022 :  10:14:34  Show Profile
Ian
Thank you for your acknowledgment- so often people ask for help or advice and never bother to acknowledge the suggestions offered.

Simon J
J3437
Go to Top of Page

Westbury

United Kingdom
2039 Posts
Posted - 11/08/2022 :  10:35:56  Show Profile
Simon, agreed!!
Chris
Go to Top of Page

Ian Prior

Australia
14 Posts
Posted - 31/08/2022 :  13:22:39  Show Profile
Hi All

Thanks to Nigel I now have an arm to play with.
Thanks to all those that offered advice.

regards
Ian
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000