Triple-M Register Forums
Triple-M Register Forums
Home | Cars for Sale | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 Lead pin-beading		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

bloodysalmon

Spain
1482 Posts
Posted - 10/12/2013 :  09:34:55  Show Profile
We after help to find a supplier of lead pin-beading. This is typically used on the Salonette and Coupes to bridge panel gaps. Often made from third-round stainless steel and filled with lead with pins set in the lead.

Measurement wise; 1/3"/8.1mm, 1"/25.2mm and 3/4"/20mm rain gutter type.

That's the item but we are after a supplier? We appreciate Paul Beck Woolies does similar but because we want approx. 10metres of each it needs to be cheaper.

So any 'leads' would be brilliant thank you

Chris Blood (D0407 & F0753)
Edited by - bloodysalmon on 10/12/2013 14:44:15

rossk

United Kingdom
495 Posts
Posted - 11/12/2013 :  19:01:50  Show Profile
I think the reason why it's so much is they have to solder the pin's in as it is no longer produce due to health and safety!

Ross Keeling
Edited by - rossk on 11/12/2013 19:06:54
Go to Top of Page

bloodysalmon

Spain
1482 Posts
Posted - 12/12/2013 :  08:15:22  Show Profile
Yes I can see why the cost is high Ross and that's why they do the aluminium alternative which is fine, but again the width of these are just not quite right ... so hence the need to find someone who can do a similar job to our measurements ... must be someone who knows someone don't you reckon?

Chris Blood (D0407 & F0753)
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register Forums © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000