Author |
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|
etlanpa
United Kingdom
560 Posts |
Posted - 16/06/2014 : 07:34:50
|
Are these available new? Are there any good secondhand ones about?
My steering's a bit on the heavy side, so looking for an arm with hole centres between 4" & 4 1/2" |
|
bloodysalmon
Spain
1482 Posts |
Posted - 16/06/2014 : 08:39:21
|
Hi Adrian, I am presuming you mean the drop-arms, if so I have just a few left @ £89 to include UK p&p.
![](http://www.triple-mregister.org/forums/uploads/bloodysalmon/20146168_Drop arms X1X.JPG)
![](http://www.triple-mregister.org/forums/uploads/bloodysalmon/20146168_Drop arms X2X.JPG)
Chris Blood (D0407 & F0753) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
O.Thomas
United Kingdom
755 Posts |
Posted - 16/06/2014 : 08:43:07
|
Barry foster is doing some at the moment, out of billet. They were just going for splining when I saw them last week. |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
etlanpa
United Kingdom
560 Posts |
Posted - 16/06/2014 : 09:49:52
|
Chris - what are the hole centres? thanks, Adrian |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
O.Thomas
United Kingdom
755 Posts |
Posted - 16/06/2014 : 10:03:50
|
Adrian just tried to mail you via forum and it bounced back saying e mail address does not exist!!?? Can you mail me or call me 07810-880818 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
bloodysalmon
Spain
1482 Posts |
Posted - 16/06/2014 : 10:16:34
|
cheers Ollie very kind of you!
these original remanufactured designed drop-arms have 4" centres
Chris Blood (D0407 & F0753) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
DickMorbey
United Kingdom
3678 Posts |
Posted - 16/06/2014 : 10:37:48
|
Hi Chris
As a matter of interest, what material are these drop arms made from?
Dick Morbey PA/PB 0743 Frieth, Oxon, UK |
Edited by - DickMorbey on 16/06/2014 10:38:07 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
etlanpa
United Kingdom
560 Posts |
Posted - 16/06/2014 : 10:54:16
|
Oliver - adrian.paul01@talktalk.net
My existing arm also is not straight - it has approx. 2" offset (looking from the side)... |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
O.Thomas
United Kingdom
755 Posts |
Posted - 16/06/2014 : 11:08:14
|
Are you the only one allowed to sell steering components then Chris?? |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Nick Feakes
USA
3379 Posts |
Posted - 16/06/2014 : 12:56:25
|
Adrian Would you please update your email address in your profile Nick
Webmaster |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
etlanpa
United Kingdom
560 Posts |
Posted - 16/06/2014 : 13:08:59
|
Done - thanks for spotting the irregularity Nick ![](images/icon_smile.gif) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
bloodysalmon
Spain
1482 Posts |
Posted - 17/06/2014 : 08:51:13
|
Adrian, the info you needed ... "The arm is made from Cast Ductile Iron with spec of 420/12 elongation Spherical Graphite that gives a 12% strength increase against original drop arm, that were 5 3/16" long. However, hole centres are exactly 4" and have not changed. The serial cast originally has been replicated as 188480A and SOS on the reverse"
The company Manor Foundary in Derbyshire assure me that the very same material is used by them to make similar Aston Martin steering components today
so if you want one that looks right as per originals, stronger than originals then hear ya go ... 21 of these have already been sold
Chris Blood (D0407 & F0753) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
rossk
United Kingdom
495 Posts |
Posted - 17/06/2014 : 09:27:41
|
I would have thought the arms would have been forged steel?
Ross Keeling |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
|
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|