Author |
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|
PeterN
United Kingdom
240 Posts |
Posted - 17/01/2017 : 16:27:18
|
Spent most of today making a new firewall for the M. Though I say it myself, I've done a pretty fair job. It's an almost exact replica of the original which I used as a pattern. Trouble is the original has a cut out for the steering column which is tight one side and 6 or 7mm clear the other. It's one of those "only I will see it" things.......but can I live with it??? By the way, if I remake it, instead of using ali coated ply, is it ok to use 6mm ali?
Peter 1930 M type MG 748 2M/1506 |
|
LewPalmer
USA
3244 Posts |
Posted - 17/01/2017 : 18:39:32
|
Peter, Are you certain that the steering column is centered on the dash panel recess and the steering column is in the correct position? Either of those can shift the column at the firewall one way or the other.
Lew Palmer PA1169, PB0560 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
PeterN
United Kingdom
240 Posts |
Posted - 17/01/2017 : 21:29:41
|
Good point Lew, I'll check but the little notch which accommodates the manual adv/ret rod is smack in the right place currently, although I guess that will rotate around a little.
Peter 1930 M type MG 748 2M/1506 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
LewPalmer
USA
3244 Posts |
Posted - 17/01/2017 : 21:56:58
|
Sorry, I meant to say "and the steering column support bracket" is in the correct position
Lew Palmer PA1169, PB0560 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Nick Feakes
USA
3378 Posts |
Posted - 18/01/2017 : 13:00:14
|
Peter What adhesive did you use to attach the aluminium? Nick |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
NeilS
United Kingdom
199 Posts |
Posted - 18/01/2017 : 13:17:32
|
Peter,
I have to do the very same job for mine is there any chance you could make a card or paper template for me as the one I have is badly wrong as are the tank shelf and side pieces which will also be redone.
I personally think 6mm aluminium will be far too heavy and would dtick with the ply / aluminium sandwich
Thanks,
Neil |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Blue M
United Kingdom
1474 Posts |
Posted - 18/01/2017 : 16:27:43
|
The aluminium is wrapped round the ply like the valances on the chassis below the bonnet - no glue involved. I changed to solid a few years ago - it stiffened the scuttle quite a bit (and the chassis too with modified Minor brackets fitted). |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
PeterN
United Kingdom
240 Posts |
Posted - 18/01/2017 : 20:17:32
|
Wrapping something thin like ali or vinyl around wood or metal is always easier if it's glued flat first I think. The best glue I've ever used for this type of job is heavy duty spray on carpet glue. I've remade the firewall today Lew as the steering column was in the right place. Neil, I can make a pattern with pleasure. Email your address and I'll get it done
Peter 1930 M type MG 748 2M/1506 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
geoffw
Australia
106 Posts |
Posted - 19/01/2017 : 22:29:46
|
Neil, When you have finished using Peters pattern could I borrow it please?
Geoff. |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
NeilS
United Kingdom
199 Posts |
Posted - 20/01/2017 : 07:17:00
|
Geoff,
I can certainly send it on to you when I am Finnshed.
Neil
Neil |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
poulsendk
Denmark
270 Posts |
Posted - 20/01/2017 : 11:39:03
|
To day I am making the plywood aluminium firewall to M 2642
![](http://www.triple-mregister.org/forums/uploads/poulsendk/2017120113810_wall 005.jpg) Jorgen Poulsen
MGM 1930 MGM 1931 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
|
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|