Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 J2 Float Chamber Lid		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

njnh

United Kingdom
404 Posts
Posted - 26/04/2019 :  13:16:40  Show Profile
Does anyone have a J2 float chamber lid (T1 with tickler pin) they are prepared to sell?

A previous owner fitted a wrong-sided (LH) lid on one of my carburettors - they should both be the same (RH). The copper pipework doesn't fit with mismatched lids.

I will try to attach a photo of what I am looking for, below

Thank you in advance

Nigel H

sam christie

United Kingdom
3101 Posts
Posted - 26/04/2019 :  14:10:33  Show Profile
Nigel, I believe your example although correctly handed is a later type. The originals (so far as I can tell) are like this.





I went through the same process of trying to find the right ones but gave up and ordered two new ones (in the original style) from Burlen. Part number AUE 993. The overflow pipes were AUC 3201.

This was the previous thread.

http://www.triple-mregister.org/forums/topic.asp?ARCHIVE=true&TOPIC_ID=8817&SearchTerms=J2,float,chamber

But you might still be lucky.

Sam
Edited by - sam christie on 26/04/2019 15:16:03
Go to Top of Page

njnh

United Kingdom
404 Posts
Posted - 26/04/2019 :  18:48:25  Show Profile
Thanks for the information Sam.

I would be happy with the later type provided it has the tickler pin.

Anyone?

Nigel H
Go to Top of Page

sam christie

United Kingdom
3101 Posts
Posted - 26/04/2019 :  22:28:02  Show Profile
Nigel, this one is on eBay at the moment, but you will need to add the tickler etc.

https://www.ebay.co.uk/itm/Float-chamber-lid-for-SU-carb-carburetter-size-T1-early-type-AUC4268/323770157259?epid=14027993224&hash=item4b623488cb:g:cU8AAOSwSe5cOLxN





Sam
Go to Top of Page

Richard Hardy

United Kingdom
2159 Posts
Posted - 27/04/2019 :  09:41:15  Show Profile
The bulbous ended ones are the correct ones for the J2, also, fitted to Morris 8s if this helps

Rich

Vintage MG Parts
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000