Author |
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
Peter Cundy
Australia
40 Posts |
Posted - 31/01/2021 : 07:43:22
|
I am hoping that someone may have a spare one or can direct to a supplier? The type with side levers for Fast running and Choke preferred. Peter
![](https://www.triple-mregister.org/forums//uploads/Peter Cundy/20211317420_P1050449.JPG)
Peter Cundy |
|
paul55
Luxembourg
732 Posts |
Posted - 31/01/2021 : 08:18:45
|
Peter, if you mean this type, I bought it from Tom Dark, but it was a few years ago. I would try Andy King, he might be able to help.
![](https://www.triple-mregister.org/forums//uploads/paul55/202113181654_remote.JPG)
|
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
cleydon
USA
213 Posts |
Posted - 31/01/2021 : 17:40:17
|
HI Peter, For what it's worth, I've written Tom Dark and Andy King for the past three years in an effort to get these side levers for the remote. I have never been able to get them to respond to my requests no matter how thoughtful or patient or kind I express my need. I wish you the best of luck, but should you elect to have them made, I'd love to hear from you. Best, Chris |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Westbury
United Kingdom
2041 Posts |
Posted - 31/01/2021 : 20:27:22
|
Hello, Chris. ( and Peter )
I think I may have a drawing of these side levers somewhere if you fancy making them yourself.
P.S, Chris, Greg who now has our old KN has been in touch with me.
Regards,
Chris |
Edited by - Westbury on 31/01/2021 20:39:00 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Mark Caroe
United Kingdom
38 Posts |
Posted - 31/01/2021 : 21:22:18
|
I recently made a pair out of brass for my car, I also couldn't find any either. I attach a photo, they take a couple of hours each to make on the Myford, they are fiddly with the octagonal facets. Feel free to send me an email. I intend to chrome plate the levers. I didn't have a drawing so they as close as I can get from photos for an amateur.
All the best
Mark
![](https://www.triple-mregister.org/forums//uploads/Mark Caroe/2021131212057_levers.jpg)
Mark Caroe |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Westbury
United Kingdom
2041 Posts |
Posted - 31/01/2021 : 22:22:40
|
Hello, Mark.
They are superb and much better than the originals!
Chris |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Dan F
USA
846 Posts |
Posted - 31/01/2021 : 23:36:26
|
Chris: I will eventually need a set of the side levers as well . I would love to see the drawing, thanks Dan |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
cleydon
USA
213 Posts |
Posted - 01/02/2021 : 15:40:51
|
Thankyou Chris and Mark for your posts. Very nice job, Mark! I suspect it might take me a bit more than a few hours to make, but I would love a drawing should you still have one. Are these similar to the ones you have made, Chris? |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Westbury
United Kingdom
2041 Posts |
Posted - 01/02/2021 : 15:43:34
|
Okay, Dan, I will let you know when I find them.
Chris |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Westbury
United Kingdom
2041 Posts |
Posted - 01/02/2021 : 15:51:35
|
Hello, Chris.
Our posts have just crossed. The drawings I have are of the originals and the octagons are not as pronounced as Mark’s, and are a lot slimmer too. I should have drawings of the internal bracketry as well.
Still searching amongst my files !
Chris |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
cleydon
USA
213 Posts |
Posted - 01/02/2021 : 16:18:49
|
Many thanks, Chris
I had remembered that they were slim and the boss at the bottom of a smaller diameter. It will be exciting to see the actual drawings! Best, Chris
|
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Mark Caroe
United Kingdom
38 Posts |
Posted - 01/02/2021 : 16:45:34
|
Chris,
I'd be really grateful for a copy of the drawings too, I'd like to get them right!! I can always slim down the bosses. I am also interested in the drawings for the connecting levers as they are next on my list.
Many thanks
Mark
PS I also tried to get the levers from Tom as he supplied the remote. I think the problem is a tiny demand and a significant programming set-up cost for him to make them.
Mark Caroe |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Peter Cundy
Australia
40 Posts |
Posted - 02/02/2021 : 07:50:43
|
Thank you everyone for the advice. Peter
Peter Cundy |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Westbury
United Kingdom
2041 Posts |
Posted - 02/02/2021 : 13:58:28
|
The ‘drawings’ of the control lever and rods for the preselector. Apologies for the poor quality, it is quite a while since I last saw them! I have similar details of the gear wheels if required. I would recommend Mark’s version.
Chris
![](https://www.triple-mregister.org/forums//uploads/Westbury/202122135556_1EDF3025X5482X423CXB378XC568E68E508E.jpeg)
![](https://www.triple-mregister.org/forums//uploads/Westbury/202122135653_1390577DXAF66X4000XBA52XE5B5565ACBDB.jpeg)
|
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Gerhard Maier
Germany
879 Posts |
Posted - 02/02/2021 : 14:25:01
|
Thank you Chris for your interesting drawings.
A while ago I also needed a pair of levers for my other car, and to make a copy, I measured the (original?) one which I had. (sorry about the millimeters!)
But in the end using this one to make a sand casting, was straightforward. Gerhard
![](https://www.triple-mregister.org/forums//uploads/Gerhard Maier/20212214173_Measures taken from the X possibly original X remote side levers of my ENV 75.jpg)
|
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
cleydon
USA
213 Posts |
Posted - 02/02/2021 : 15:40:59
|
Thank you everyone who has contributed to the thread on this topic. I think I have enough information to make units for my own selector.
Interestingly, when I went through my own junk box, I found a lever which is nearly identical to Chris' drawing. The design is as I remember on K3020 when I restored it. Gerhard's and Mark's lever would certainly feel more robust and pleasing in the hand when operating.
![](https://www.triple-mregister.org/forums//uploads/cleydon/202122153852_IMG_4699.jpg)
|
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|