Author |
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|
Whitworth
USA
135 Posts |
Posted - 22/07/2022 : 19:45:45
|
Looking for a set of firewall brackets for current project. These are the ones that also hold the lubrication plates, etc. Will also take patterns if no originals are available. |
|
Sr537
Australia
31 Posts |
Posted - 26/07/2022 : 07:51:04
|
Not sure if they are the same but had a couple of extra sets laser cut when doing our F2. Freight would probably be a killer as I am in Australia.
![](https://www.triple-mregister.org/forums//uploads/Sr537/202272674946_0446AEA9X3843X4E31X95D9X09D8279067BD.jpeg) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
DickMorbey
United Kingdom
3681 Posts |
Posted - 26/07/2022 : 10:24:31
|
Hello Stuart and here's wishing you a very warm welcome to the forum.
How is work progressing on the F2? Well, we hope!
Best wishes
Dick Morbey, Register Secretary PA-PB 0743 Frieth, Oxon, UK secretary@triple-mregister.org |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Sr537
Australia
31 Posts |
Posted - 26/07/2022 : 11:00:46
|
Thank you for your welcome.
F2 is starting to make some progress after going backwards for a while. Hope we can track down some elusive parts and pick a few brains in the register.
![](https://www.triple-mregister.org/forums//uploads/Sr537/2022726105337_89511D27X64FFX4B55XA629X1DCDD9E9AB59.jpeg)
![](https://www.triple-mregister.org/forums//uploads/Sr537/2022726105439_4A67C621XC9C7X4CA8XAC53X2C13140D1806.jpeg) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
LewPalmer
USA
3248 Posts |
Posted - 26/07/2022 : 17:49:18
|
Jack, If you find a pattern for the stanchions, there is a company in the US which I have used several times to laser cut various materials. They are very reasonably priced and can do some CNC bending. Look for SendCutSend.com. I have been very impressed with their prices, quality, and service.
Lew Palmer PA1169, 2M1281, NA0651 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Whitworth
USA
135 Posts |
Posted - 26/07/2022 : 18:05:50
|
Thanks for the info Lew. Are you needing a set as well?
|
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Whitworth
USA
135 Posts |
Posted - 26/07/2022 : 18:51:51
|
Stuart - Beautiful job on brackets and car but I don't think they would work for us. What thickness of steel did you use? I am still looking for N-type brackets or a pattern to have a set made here. Thanks for your response. |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
George Eagle
United Kingdom
3243 Posts |
Posted - 28/07/2022 : 10:58:04
|
Stuart - I have added the two photos to the file for the car - I hope that is ok.
George#Registrar F/L/N types. |
Edited by - George Eagle on 28/07/2022 10:59:06 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
LewPalmer
USA
3248 Posts |
Posted - 28/07/2022 : 13:30:13
|
Thanks, Jack. No, I have what I need.
Lew Palmer PA1169, 2M1281, NA0651 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
|
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|