Author |
Topic |
|
MmmGee
United Kingdom
140 Posts |
Posted - 14/11/2022 : 20:42:52
|
I know it has been asked for before (thanks Colin)but Nev Churcher is still looking for an Arnott Oil tank for his J3. If anyone has or knows of one for sale it would be appreciated. Please PM me. TIA
MmmGee |
|
Nick Dean
United Kingdom
444 Posts |
Posted - 14/11/2022 : 20:54:48
|
As this is obviously a source problem, why not get the motor cycle boys to fabricate an exact copy. Good luck, Nick.
N A Dean |
|
|
Blithe Spirit
United Kingdom
188 Posts |
Posted - 15/11/2022 : 17:20:31
|
Hi Mmm Gee, I had one but it is long gone. From memory it was a cube about 4 inches square with a screw on airtight cap. It was fed at the top from the inlet manifold at boost pressure. The outlet, also on the top had an internal dip tube, and an adjustable needle valve so one could set the prescribed drip feed of oil to the centre of the supercharger, so not just a tank. This arrangement gave a greater oil supply when most needed. Alternatively, take an oil feed from the pressure rail again through a needle valve or fixed orifice as Mr Shorrock did. Regards, David J3768 |
|
|
Ian Bowers
United Kingdom
947 Posts |
Posted - 16/11/2022 : 08:06:41
|
There is one on J3772 with an Arnott s/c. I can photo and measure if that helps.
Let me know what you need in the way of images and measurements.
Ian Bowers OD 6791 J3 3772 |
|
|
John Brinkmann
USA
153 Posts |
Posted - 16/11/2022 : 19:18:20
|
I too have an Arnott without oil feed. Any photos, information or the actual item would be most appreciated.
John. J3752 |
|
|
Ian Bowers
United Kingdom
947 Posts |
Posted - 17/11/2022 : 08:24:23
|
John I am away from home this week, but will photo and measure during the week to come and send on to you and Trevor.
Ian Bowers OD 6791 J3 3772 |
Edited by - Ian Bowers on 17/11/2022 08:25:02 |
|
|
John Brinkmann
USA
153 Posts |
Posted - 17/11/2022 : 20:45:24
|
Thank you Ian. The delay will not slow my restoration. My Arnott is a 1600, which might be too large for 746cc. What are size Arnott are you running and what boost does it provide at engine speed?
John. J3752 |
|
|
Ian Bowers
United Kingdom
947 Posts |
Posted - 20/11/2022 : 10:11:45
|
Basic information
tank size 6in x 5in x 3in. using 20 - 50 bog standard engine oil.
Photos to follow to personal email adresses.
Ian Bowers OD 6791 J3 3772 |
|
|
|
Topic |
|