Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 P Type lowering blocks
 Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Peter Scully

United Kingdom
161 Posts

Posted - 20/02/2023 :  11:44:51  Show Profile
Looking for a set of blocks to lower the ride height on my P Type by about an inch for speed events. I know that I can achieve the same by having the springs reset, but I thought that blocks would give me greater flexibility in the future if I want to return to standard ride height.
Thanks,
Peter

Onno

Netherlands
1048 Posts

Posted - 20/02/2023 :  12:30:16  Show Profile
Not sure anyone makes these.
Have made them several times, got block cut by my local metal shop and just drilled the holes with a pillar drill.
Then you just need longer (u-) bolts.

Onno "J,D,M" Könemann
Go to Top of Page

Bruce Sutherland

United Kingdom
1576 Posts

Posted - 20/02/2023 :  15:24:16  Show Profile
Peter,
I believe a 'lowering block' will only work at the rear suspension spring, but the drawing & photo below show what I needed to accommodate over-cambered new rear springs - which may help:








Bruce. (PB0564)
Go to Top of Page

Peter Scully

United Kingdom
161 Posts

Posted - 20/02/2023 :  17:15:22  Show Profile
Many thanks Onno and Bruce. Most helpful.
Peter
Go to Top of Page

Onno

Netherlands
1048 Posts

Posted - 20/02/2023 :  19:36:07  Show Profile
Works at the front as well, just reduces the spring travel due to the chassis going over.
Should not be a problem if you don’t go trialling ;)

Onno "J,D,M" Könemann
Go to Top of Page

Westbury

United Kingdom
2025 Posts

Posted - 21/02/2023 :  00:24:59  Show Profile
Seem to be a lot of leaves on your rear springs, Bruce.
Regards,
Chris
Go to Top of Page

coracle

United Kingdom
1958 Posts

Posted - 21/02/2023 :  10:27:43  Show Profile
They look much like mine with 9 leaves as on page 495 of Blower (PA/B). The 6 cylinder cars seem to have fewer leaves.

Perhaps they are like British Rail and are the wrong sort of leaves?

Edited by - coracle on 21/02/2023 10:29:18
Go to Top of Page

Bruce Sutherland

United Kingdom
1576 Posts

Posted - 21/02/2023 :  13:30:34  Show Profile
Chris,
My rear springs have 9 off leaves, just like:




My new rear springs just have excessive unloaded curvature, hence the addition of spacer blocks.


Bruce. (PB0564)
Go to Top of Page

Westbury

United Kingdom
2025 Posts

Posted - 21/02/2023 :  15:32:18  Show Profile
Thanks, Bruce and Nigel.
It is many years since I had a P type and I had forgotten how many leaves were fitted. They just appear excessive to the eye.
Regards,
Chris
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000