Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 General Information
 Oil Pressure pipe route		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

dade

United Kingdom
513 Posts
Posted - 21/02/2011 :  11:18:17  Show Profile
Hi All

I would appreciate it if someone would post a drawing of the oil pressure pipe route for a PB.

If I guess it, I am bound to get it wrong!!

Regards to All

Russ
PB0333

Nick Feakes

USA
3372 Posts
Posted - 21/02/2011 :  12:29:18  Show Profile
Hi Russ
Have a look at this drawing under 'Miscellaneous'
http://www.mgmmm.com/tekeningen.htm

Nick
Go to Top of Page

dade

United Kingdom
513 Posts
Posted - 21/02/2011 :  17:37:56  Show Profile
Hi Nick

Thanks for the thought Nick, however what I require is the route from the firewall to the oil pressure gauge on the dashboard.

Regards

Russ
PB 0333
Go to Top of Page

Nick Feakes

USA
3372 Posts
Posted - 21/02/2011 :  17:53:32  Show Profile
OK, my misunderstanding. I guess it follows the line of the wiring?
Nick
Go to Top of Page

LewPalmer

USA
3243 Posts
Posted - 21/02/2011 :  18:00:04  Show Profile
The oil pressure pipe goes straight back from the oil filter canister through a hole in the lower near side of the firewall (just above the floorboard, then straight up on the back face of the firewall to a level behind the facia, then rearward to the gauge. I also left enough pipe to form a gentle loop before attaching to the gauge.


Lew Palmer
Registrar, NAMMMR
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000