Author |
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|
Moth eaten
Australia
946 Posts |
Posted - 23/03/2013 : 11:46:34
|
Does anyone have an original ignition key to fit the lucas switch. I want to make a copy, I know its a simple design with a rod stem and a 2 blade key. I did get a key with my car but it couldn't be original it falls out of the lock barrel being entirely flat.
N.D.Willey |
|
Keith Durston
United Kingdom
711 Posts |
Posted - 23/03/2013 : 12:01:25
|
I am also interested to know what an original key looks like as my replica, bought off ebay for almost nothing, falls out very easily when switched on. This key is also totally flat. Keith |
Edited by - Keith Durston on 23/03/2013 12:02:31 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Keith Wallace
United Kingdom
367 Posts |
Posted - 23/03/2013 : 14:28:20
|
If the key falls out, the key switch slot is probably very worn, the slot should a line with key to allow insertion and be diagonal to the key when the key is turned to the on position, preventing the key from being with drawn, (or falling out).
The slot can be repaired, but you will need to take the switch apart.
Keith Wallace
|
Edited by - Keith Wallace on 23/03/2013 14:30:19 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
DickMorbey
United Kingdom
3677 Posts |
Posted - 23/03/2013 : 16:42:47
|
Keith D:
I have a pair of these keys - both stamped LUCAS and Ignition only.
One is dead flat, the other has a pressed indentation.
Here are some pics.
![](http://www.triple-mregister.org/forums/uploads/DickMorbey/201332316_Flat key.jpg)
![](http://www.triple-mregister.org/forums/uploads/DickMorbey/201332316_photo.JPG)
Table by G-Plan, c. 1970
Dick PA/PB 0743 Nr. Henley-on-Thames, Oxon, UK |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
George Eagle
United Kingdom
3240 Posts |
Posted - 23/03/2013 : 17:43:57
|
The ignition key on my NB is the same as that Dick has photographed, it is dead simple in design but does not fall out.
On the other hand the ignition key for the L2 is a properly cut Union key.
There is a small company in the UK, they exhibit at the various classic car shows, who carry a good stock of blanks and cut keys to order. At the moment I cannot recall their name. I will see if they advertise in the magazines - such as The Automobile.
George L2023 and NA0960 |
Edited by - George Eagle on 23/03/2013 17:45:14 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Moth eaten
Australia
946 Posts |
Posted - 23/03/2013 : 21:56:49
|
Very interesting indeed. I will show my key shortly. Brand is ACE. Looking at my lock it would be worn but appears to have a definite centre tube shape. I will dismantle it eventually for the key profile. If its worn why does it have a centre round bore, this would not be for an entirely flat key?
N.D.Willey |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Moth eaten
Australia
946 Posts |
Posted - 23/03/2013 : 22:11:07
|
Images showing my Lucas ignition switch and key.
![](http://www.triple-mregister.org/forums/uploads/Moth eaten/201332322_GEDC3241.JPG)
![](http://www.triple-mregister.org/forums/uploads/Moth eaten/201332322_GEDC3243.JPG)
![](http://www.triple-mregister.org/forums/uploads/Moth eaten/201332322_GEDC3244.JPG)
N.D.Willey |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Moth eaten
Australia
946 Posts |
Posted - 23/03/2013 : 22:13:10
|
Heck my ignition key hole is certainly very worn!!!
N.D.Willey |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Gerard
Netherlands
39 Posts |
Posted - 25/03/2013 : 08:05:35
|
There is a drawing of the key on the website: www.mgmmm.com Drawings-Firewall Dashboard - 12
Jos / Gerard |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
dade
United Kingdom
513 Posts |
Posted - 25/03/2013 : 09:10:03
|
Hi all
Tim Hodgkiss sells blanks, however no Lucas logo.
He has web site
Russ PB 0333 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
|
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|