Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 General Information
 Gear Lever Identification		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

sam christie

United Kingdom
3107 Posts
Posted - 06/06/2014 :  13:25:08  Show Profile
The two gear levers at the top are J2. The one at the bottom is similar but not the same.

What is it?



Sam
Edited by - sam christie on 06/06/2014 13:25:44

Bob Clare

United Kingdom
278 Posts
Posted - 07/06/2014 :  00:22:48  Show Profile
Probably P or N type. What are the dimensions?
Bob Clare
Go to Top of Page

George Eagle

United Kingdom
3240 Posts
Posted - 07/06/2014 :  11:16:03  Show Profile
I also think the lever must be for P/Ns which are of a shorter length than the J/Ls.

George
L2023
Go to Top of Page

sam christie

United Kingdom
3107 Posts
Posted - 07/06/2014 :  12:57:28  Show Profile
The lever feels like a robust version of the J2 lever - quite pleasingly strong . The J2 lever feels quite delicate by comparison.

The rough measurements are indicated below.



Sam
Go to Top of Page

Cymber

United Kingdom
966 Posts
Posted - 07/06/2014 :  21:31:04  Show Profile
Sam,
On my P Type lever your 2" dimension is 1 7/8" and the 5 3/42 one is 5"

Maurice Blakey.
Go to Top of Page

Bob Clare

United Kingdom
278 Posts
Posted - 08/06/2014 :  00:15:00  Show Profile

I have a P Type lever in my hand right now and the measurements agree with Maurice's.

The length of the bottom bit of the shaft from the bottom of the central ball to the end of the little ball is 2".

I also have a J Type lever which differs in that the length of the top shaft is 6½”.

Yours is a bit of a "hybrid".
Bob Clare
Go to Top of Page

sam christie

United Kingdom
3107 Posts
Posted - 08/06/2014 :  01:26:18  Show Profile
Bob, that is correct.The distance from the 1" ball to the end of the little ball is indeed 2" - perspective is of course the reason for the confusion.

Thanks Bob and Maurice for the prompt and convincing identification. It will be tested in a P-type shortly to make certain sure.


Sam
Edited by - sam christie on 08/06/2014 01:29:37
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000