Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 General Information
 I'm looking for a bearing.		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

e3gogo

Japan
12 Posts
Posted - 12/06/2014 :  04:22:17  Show Profile
I'm looking for a hemispheres for worm follower that is used to Marles Weller Steering Gear of J2.
The thickness of 3.7mm diameter bearings 7mm, I have cut about 0.8mm interfere with the part side by side.
Photo only one side, but the four front and back surfaces is required.
Part of No. 12 of the drawing only I want.

Colin Butchers

United Kingdom
1487 Posts
Posted - 12/06/2014 :  10:12:31  Show Profile
Hello Iseki,

You can obtain a set of four new hemispheres for the Marles Weller steering box, from Sports & Vintage Motors of Shrewsbury, UK. Their address is in the "Traders" Section of this Forum.

Best wishes,


Colin B.
Go to Top of Page

e3gogo

Japan
12 Posts
Posted - 12/06/2014 :  12:45:21  Show Profile
Thank you Colin
I have e-mail immediately.
Go to Top of Page

e3gogo

Japan
12 Posts
Posted - 06/07/2014 :  09:56:04  Show Profile
After all, I did not be purchased separately hemisphere bearing, I made it with Japan.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000