Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 P-Type Badge Bar Clips		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Whitworth

USA
135 Posts
Posted - 26/07/2014 :  15:57:18  Show Profile
Does anyone know of a source for small (1/2") badge mounting clips to fit a PB badge bar? Vendors have them for 3/4" and 1" bars but I haven't been able to find smaller ones on line. Any leads will be appreciated. - Jack

LewPalmer

USA
3244 Posts
Posted - 26/07/2014 :  16:44:19  Show Profile
Jack,
I use a 3/4" clip, but use a spacer to take up the gap. Use a 3/4" brass round stock, drill the center to match the badge bar dimension, slice it lengthwise, and insert into the clip. Hardly visible when mounted.

Lew Palmer
PA1169, PB0560
Go to Top of Page

Bob Stringfield

United Kingdom
854 Posts
Posted - 26/07/2014 :  18:15:17  Show Profile
Likewise, with alloy spacer. Doesn't show - see photo of APP 186 on 'Information wanted ...' thread.

Bob.
Go to Top of Page

Whitworth

USA
135 Posts
Posted - 27/07/2014 :  14:12:51  Show Profile
Thank you Lew and Bob. I will do the same. - Jack
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000