Author |
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|
bloodysalmon
Spain
1482 Posts |
Posted - 13/05/2015 : 08:46:54
|
None of my speedo cables marry up to the hole in the ENV gearbox; does anyone know exactly what type of end it is, what length? Does anyone have a spare for me buy or at least to be copied please? Looking down the hole from above the ENV box I can see it is quite wide but unsure what I am looking for!
Chris Blood (D0407 & F0753) |
|
George Eagle
United Kingdom
3244 Posts |
Posted - 13/05/2015 : 09:12:17
|
Have you tried S & V, they were able to supply me with the correct cable for my EN V75 pre-select gearbox.
George L2023 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Colin Butchers
United Kingdom
1487 Posts |
Posted - 13/05/2015 : 10:04:47
|
Speedograph/Richfield can make any length of speedo cable with almost any end fittings required. Very helpful people. They can even supply little in-line gearboxes to correct any incompatibility of gearbox output ratio to speedometer cable turns.
Colin B. |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
bloodysalmon
Spain
1482 Posts |
Posted - 13/05/2015 : 16:28:15
|
Cheers Colin, I've been going to Speedograph for some 20 years, only 5 mile away. The thing is, I don't have one to start with. I have looked on their website but Tim (the owner) doesn't show anything pre-war ... so I have called them but await a response to see if he knows exactly what I need.
Now if by any chance someone has got a photo or they can do you of the said cable that would be brilliant please.
Chris Blood (D0407 & F0753) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
bloodysalmon
Spain
1482 Posts |
Posted - 13/05/2015 : 18:18:11
|
along with a photo does anyone know what type of end it is in the gearbox?
Chris Blood (D0407 & F0753) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
O.Thomas
United Kingdom
755 Posts |
Posted - 13/05/2015 : 19:22:29
|
Think its referred to as smiths type drive |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Keith Nelson
United Kingdom
83 Posts |
Posted - 13/05/2015 : 19:25:31
|
The BW online catalogue (p46) has some descriptions of the various cables and end fittings Regards Keith
ON |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
bloodysalmon
Spain
1482 Posts |
Posted - 13/05/2015 : 20:44:27
|
Olli, looking on BW's P46 (ta Keith) does indeed describe the cable as a Smiths type. However, this now suggests that the M,D,J and F are the same and if they are then I have 3 cables in my spares. But ... although the threaded cap fits fine and the cable is inserted down the hole it is clear the cable isn't going to be turned by anything as it doesn't reach far enough nor can I see anything down there that will ... is the ENV different by any chance?
Chris Blood (D0407 & F0753) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Foz
United Kingdom
773 Posts |
Posted - 13/05/2015 : 22:19:48
|
seems likely that the drive pinion is missing if you have a big deep hole in the bronze sleeve.........if you can see to the bottom there will be a worm gear..... Foz |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
bloodysalmon
Spain
1482 Posts |
Posted - 13/05/2015 : 22:37:04
|
ta Foz I new and thought there was something missing ... so there is a drive pinion. Do these just slide into the vacant hole? Are they available as spares or a old new ones? Again anyone have a photo so at least I know what to look at and for?
Chris Blood (D0407 & F0753) |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Eric Taylor
France
157 Posts |
Posted - 14/05/2015 : 08:55:49
|
Hi Chris, here are two photos of the pinion, gear and sleeve.
![](http://www.triple-mregister.org/forums/uploads/Eric Taylor/20155148_IMG_0197X800.jpg)
![](http://www.triple-mregister.org/forums/uploads/Eric Taylor/20155148_IMG_0198X800.jpg)
Regards,Eric. |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
bloodysalmon
Spain
1482 Posts |
Posted - 14/05/2015 : 19:20:49
|
Hi Eric, thanks for the photos ... I think my confusion is that I didn't state earlier that my F is indeed a F2 which has a PB speedo that requires a E.R.F speedo cable end. However, I am clear now that I am missing the pinion and gear for my ENV ... this is now what I need too ... any spare out there please?
Chris Blood (D0407 & F0753) |
Edited by - bloodysalmon on 15/05/2015 08:19:01 |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
gb
United Kingdom
205 Posts |
Posted - 14/05/2015 : 22:25:06
|
Hi Chris,
I think I still have an old speedo cable from the F1 I had a while ago in the "spares" bin at the back of the garage. From memory the cable had frayed/broken at the gearbox end but its all there. I'll dig it out tomorrow if you are still interested?
Cheers
Glenn
PA 1836
|
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
|
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|