Author |
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
Ozzings
United Kingdom
47 Posts |
Posted - 03/09/2023 : 21:16:37
|
Hi I am starting to build the challenging L0375 , can anyone help with the following L1 front apron, an old one for a pattern would help Clock and Ammeter Speedometer Rear seat Front near side wing If you have any parts you think might be of interest any help would be greatly appreciated Regards Paul
Paul |
|
Moth eaten
Australia
946 Posts |
Posted - 12/09/2023 : 08:38:45
|
Paul I will send images of the apron with dimensions, just give me some time to do it! Kind regards Nigel
N.D.Willey |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Ozzings
United Kingdom
47 Posts |
Posted - 12/09/2023 : 08:40:50
|
That is very kind of you, many thanks Regards Paul
Paul |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Moth eaten
Australia
946 Posts |
Posted - 16/09/2023 : 09:46:35
|
Paul I have unearthed my front apron, would Barry Walker be able to supply you with one, it might be a lot easier and cheaper to buy a relic and restore it?
N.D.Willey |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Moth eaten
Australia
946 Posts |
Posted - 16/09/2023 : 10:12:00
|
Paul this is my relic, you can see the complexity in making a copy. Possibly the best way would be to make you a pattern with dimensions to work from. I would try to find another from the avail sources. If not let me know and I will make you a pattern to the best of my ability. Nigel
![](https://www.triple-mregister.org/forums//uploads/Moth eaten/202391610632_20230916_185808.jpg)
![](https://www.triple-mregister.org/forums//uploads/Moth eaten/202391610658_20230916_185820.jpg)
![](https://www.triple-mregister.org/forums//uploads/Moth eaten/202391610726_20230916_185835.jpg)
![](https://www.triple-mregister.org/forums//uploads/Moth eaten/202391610751_20230916_185900.jpg)
![](https://www.triple-mregister.org/forums//uploads/Moth eaten/202391610819_20230916_185908.jpg)
N.D.Willey |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
richardmmm
USA
63 Posts |
Posted - 16/09/2023 : 14:39:38
|
I see that S&V list an apron for the L-type as their 1505. Maybe worth a check with Jamie. No connection except I bought an apron for my NA from him and was quite satisfied. |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Ozzings
United Kingdom
47 Posts |
Posted - 16/09/2023 : 21:17:50
|
quote: Originally posted by richardmmm
I see that S&V list an apron for the L-type as their 1505. Maybe worth a check with Jamie. No connection except I bought an apron for my NA from him and was quite satisfied.
Paul |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Ozzings
United Kingdom
47 Posts |
Posted - 16/09/2023 : 21:20:25
|
Hi Richard and Nigel Thanks for your help, I will speak to Barry and Jamie, Regards Paul
Paul |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Moth eaten
Australia
946 Posts |
Posted - 16/09/2023 : 23:18:55
|
The N type chassis is wider than the L type I think.?
N.D.Willey |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
coracle
United Kingdom
1936 Posts |
Posted - 16/09/2023 : 23:39:42
|
Not at the dumb irons I think, as although the front axle is wider, the spring spacing is the same. |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
richardmmm
USA
63 Posts |
Posted - 17/09/2023 : 13:36:28
|
S&V list different apron numbers for L-type and NA. So my guess is that they are a little different. |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
coracle
United Kingdom
1936 Posts |
Posted - 17/09/2023 : 13:41:32
|
Although the width is the same, the sloping radiator of the L will introduce a difference. |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Ozzings
United Kingdom
47 Posts |
Posted - 21/09/2023 : 08:04:09
|
I think I have found an N type front shroud, will make it fit, also has some N type front wings and running boards, will they fit the L or do they need adapting? I know the KN used the N type body on a K chassis and the L is the same chassis length, again any help much appreciated
Paul |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
PeterL
United Kingdom
1723 Posts |
Posted - 21/09/2023 : 09:58:06
|
Paul
The L is a development of the F and J and precedes the N and P. Thus F and J bits will fit but are wrong and the N has a wider track which precludes the use of N bits! As someone has said, the sloping radiator might prevent use of a P valence. which might otherwise fit (might be worth trying, though...)
You might find the services of Steve Gilbert useful in providing new panels. I have had the odd bit and piece made for my F and have been very pleased with them.
Cheers
P |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Ozzings
United Kingdom
47 Posts |
Posted - 21/09/2023 : 10:29:43
|
Hi Thanks, I understand the wider track but isn’t it the same length as it uses th3 K type chassis rails?
Paul |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
rapide
United Kingdom
238 Posts |
Posted - 21/09/2023 : 11:29:58
|
Approx length from forward peak down to running board join is 59" and width at that point taken from body side including radius 10.25". Measurements taken on my NB but will. check the wings offered later today . A capable welder could cut and shut whole length if necessary . |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|