| Author |
 Topic  |
|
|
Nick Feakes
USA
3378 Posts |
 Posted - 07/03/2023 : 18:44:38
|
Bruce Sutherland has worked his magic and made the drawing of the dipsticks used in the N type and the later PA/PB models originally drawn by John Reid much clearer.
It is available from Document downloads|Technical|engine.
Thank you Bruce.
Nick
Webmaster |
|
|
LewPalmer
USA
3244 Posts |
Posted - 07/03/2023 : 20:24:39
|
Oh, great! I just finished calibrating my NA dispstick not two days ago. Not having a diagram, I poured a quart in at a time and marked the stick as I went. I made my own dipstick, so it had no markings.
Lew Palmer
PA1169, NA0651 |
 |
|
|
Bruce Sutherland
United Kingdom
1567 Posts |
Posted - 07/03/2023 : 23:11:03
|
Nick,
Thank you.
Lew,
I'd be interested to know how your N Type dipstick calibration compares to that in the drawing?
Whilst cross-checking the re-drawing of the dipstick, I found that that in my PB was for an N Type - now corrected to suit.
Bruce. (PB0564) |
|
|
|
LewPalmer
USA
3244 Posts |
Posted - 07/03/2023 : 23:31:49
|
I’ll have to check, Bruce. However, after I added the first two quarts, I found I had stupidly left the oil temp port fitting out, so my markings were a best guess.
Lew Palmer
PA1169, NA0651 |
|
|
|
LewPalmer
USA
3244 Posts |
Posted - 08/03/2023 : 16:47:45
|
I have checked my home made NA dipstick against Bruce’s drawing and find that the overall dimensions and the full mark are almost exactly the same.
Lew Palmer
PA1169, NA0651 |
|
|
| |
Topic |
|
Forum Locked
Topic Locked
