Bruce Sutherland
United Kingdom
1564 Posts |
Posted - 24/08/2009 : 16:34:38
|
I've measured the oil pressure connector sizes at the gauge end and at the isolation tap end at the filter off-take & they are both 1/8"BSP.
Question: what diameter (OD) should the copper pipe be - 1/8" or 3/16"? (1/8"BSP fittings are available for both pipe diameters).
Apologies, I've put this on the wrong forum.
Bruce. (PB0564) |
Edited by - Bruce Sutherland on 24/08/2009 17:57:00 |
|