Author |
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|
TomDrewett
United Kingdom
278 Posts |
Posted - 18/12/2003 : 10:05:14
|
We have a starter motor that is going the wrong way round after putting in new brushes?? Any ideas or clues how to resolve, please? It is a simple 2-brush motor and even though it is 6V running on 12 V, I did not think that starter motors were polarity sensitive. |
|
LewPalmer
USA
3254 Posts |
Posted - 19/12/2003 : 01:59:13
|
Tom,
Are you sure you replaced the wires to the brushes in their original position? I've never tried doing it wrong, but I would bet that this may have something to do with it.
Cheers,
Lew Palmer Registrar, NAMMMR |
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
TomDrewett
United Kingdom
278 Posts |
Posted - 19/12/2003 : 14:02:09
|
Hi Lew You are absolutely right. I do not know how, but must have somehow got the wires crossed over. Now all is well, thank you. I also found a very interesting web site about series wound starter motors and how to convert them to reversible and variable speed for use in robots!! Tom
http://www.m.case.btinternet.co.uk/html/stater_motor_mods.html
quote: Originally posted by LewPalmer
Tom,
Are you sure you replaced the wires to the brushes in their original position? I've never tried doing it wrong, but I would bet that this may have something to do with it.
Cheers,
Lew Palmer Registrar, NAMMMR
|
![Go to Top of Page Go to Top of Page](images/icon_go_up.gif) |
|
|
Topic ![Next Topic Next Topic](images/icon_go_right.gif) |
|
|
|